Fall Protection, Gas Detection & PPE for Construction Sites
Falls on Site Are Preventable. Is Your System Ready?
Construction workers face fall risk at height, oxygen-deficient confined spaces and combustible atmospheres on site. Protect your workforce with OHS Act-compliant fall protection, gas detection and PPE. Supporting construction projects across South Africa and SADC.
Complete Safety Solutions for Every Construction Operation
We supply, commission, service and maintain safety equipment protecting your people from the fall risks, confined space hazards and site-access failures that define construction environments
Fall Protection Systems
- Personal fall limiters for immediate fall arrest on site
- Full body harness systems for work at height
- Temporary horizontal lifelines for structural movement
- Rescue and descent systems for post-fall recovery
- Tripod and retrieval systems for confined space entry
Gas Detection & Confined Space
- Portable multigas detection for confined and enclosed spaces
- Detection of CO, H2S, LEL gases and oxygen deficiency
- Fast sensor response for safe permit-to-work decisions
- Rugged devices built for active construction environments
- Reliable monitoring for confined space entry compliance
Site Readiness & Compliance
- Alcohol testing for safety-critical site access control
- Head protection and safety eyewear for site personnel
- Equipment selection aligned with OHS Act requirements
- On-site training for correct equipment use and inspection
- Routine servicing and calibration to maintain compliance
Is Your Construction Site Fully Protected Against These Risks?
Falls from height, confined space hazards and atmospheric dangers cause preventable fatalities on South African construction sites every year. If any of these apply, it is time to act.
Unprotected Work at Height on Active Construction Sites
Scaffolding, roofing and steel fixing expose workers to fall risk on every active site. The OHS Act Construction Regulations require a fall protection plan for any work above 2 metres. Without a certified harness system and compliant anchorage, a single misstep becomes a fatality.
Confined Space Entry Without Gas Detection
Construction teams regularly enter excavations, stormwater pipes and underground chambers that accumulate CO, H2S and methane from surrounding services. Oxygen levels can drop without warning. Entry without a calibrated multigas detector puts every worker at lethal risk.
No Rescue Capability After a Fall or Confined Space Event
Suspension trauma can begin within minutes of a fall arrest event. The OHS Act requires a documented rescue plan and the equipment to execute it. Without a tripod retrieval system or trained standby attendant, an arrested fall or confined space emergency can still become fatal.
Trusted Across South Africa's Construction Industry
For over 25 years, PSA Africa has supported contractors, developers and construction teams across Southern Africa with compliant, professionally tested and field-proven safety equipment.
Certified fall protection and gas detection aligned with OHS Act Construction Regulations
Support for principal contractors, subcontractors and large-scale civil projects
On-site training, annual inspection and rapid servicing across South Africa and SADC
Certified Safety Equipment for Construction Operations
We supply industry-leading MSA safety equipment designed specifically for firefighting and emergency response — backed by 25+ years of local expertise.
Fall Protection
V-FORM Full Body Harness
Lightweight full-body harness for maintenance on elevated structures, tank roofs and pipe racks in oil and gas facilities.
Colour-contrasting straps for quick and correct donning under permit-to-work time constraints. Durable construction suited to the physical demands and environmental conditions of refinery and petrochemical plant maintenance.
MSA Cable Temporary Horizontal Lifeline
Temporary horizontal lifeline system designed for elevated work in refineries and process facilities.
Provides secure fall protection across tank roofs and structural platforms. Lightweight, fast-install design supports safe access during maintenance and shutdown operations.
V-FLEX Full Body Harness
Premium full-body harness engineered for all-day comfort during extended maintenance shifts at height.
Patented flexible connection system reduces restriction during active maintenance work. Contoured breathable padding minimises fatigue during turnaround operations where personnel work at height for extended periods.
MSA Latchways Personal Rescue Device®
Emergency self-rescue device for elevated refinery and process plant work.
Automatic controlled descent enables fast evacuation from height. Sealed, maintenance-free design stays harness-mounted for immediate deployment during high-risk operations.
V-TEC™ Personal Fall Limiter
Emergency self-rescue device for elevated refinery and process plant work.
Automatic controlled descent enables fast evacuation from height. Sealed, maintenance-free design stays harness-mounted for immediate deployment during high-risk operations.
MSA Tripod System
Emergency self-rescue device for elevated refinery and process plant work.
Automatic controlled descent enables fast evacuation from height. Sealed, maintenance-free design stays harness-mounted for immediate deployment during high-risk operations.
Sked® Basic Rescue System
Rescue stretcher designed for safe patient handling in confined spaces and technical rescue environments.
Flexible yet durable construction allows secure patient immobilisation and easy manoeuvrability through restricted access areas. Compact, rollable design with integrated lifting and towing capability ensures rapid deployment during high-risk rescue operations.
Head Protection
HERO Hard Hat
Professional structural firefighting helmet developed with firefighters worldwide for municipal and industrial fire services.
The MSA Gallet F1 XF delivers advanced head protection with integrated accessories, high comfort and modular design. This makes it ideal for structural fires, technical rescue operations and road traffic incidents.
V-Gard H1® Safety Helmet
Safety helmet designed for reliable head protection in demanding construction environments.
Lightweight, low-profile design delivers superior comfort and secure fit for all-day wear on site. Integrated accessory compatibility and advanced ventilation options ensure enhanced usability and performance.
Portable Gas Detection
ALTAIR® 4XR Multigas Detector
Rugged 4-gas monitor engineered for demanding industrial and emergency environments.
Detects combustible gases, toxic gases and oxygen deficiency, providing reliable protection in harsh conditions. With a durable design and lightweight, it ensures consistent performance and ease of use for extended operations.
ALTAIR® 5X Multigas Detector
Advanced multi-gas monitor engineered for complex industrial and emergency operations.
Features superior sensor technology and extended runtime, delivering reliable detection of combustible gases, toxic gases and oxygen deficiency. Lightweight, rugged design with clear real-time readings for confident decision-making.
GALAXY® GX2 Automated Test System
Automated calibration and bump testing system designed to keep gas detectors accurate and deployment-ready.
Provides fast, consistent testing with automatic record-keeping for compliance and simplified fleet management to ensure equipment is always response ready.
Substance Abuse
LifeLoc FC5 Hornet Breathalysers
Professional passive breath alcohol screening device for safety‑critical environments.
Detects alcohol without mouthpieces using a platinum fuel cell sensor. Rapid, reliable detection in ambient air or breath vapour ensures fast, non‑contact screening for workplace safety, security and zero‑tolerance programs. Simple icon-based display allows easy interpretation of results.
Lifeloc FC10 Portable Breathalyser
Portable professional grade alcohol tester for safety‑critical workplaces.
Combines direct BAC measurement with passive screening using a platinum fuel cell. Multiple test modes (Auto, Manual, Passive) and a clear backlit display provide fast, reliable results for workplace compliance and high-volume screening. Rugged design supports frequent use in demanding environments.
LifeLoc FC20 Portable Breathalyser
Advanced professional alcohol tester for structured compliance programs.
High-sensitivity fuel cell delivers accurate readings across automatic, manual, and passive test modes. On-board memory, customizable settings and exportable data enable full record-keeping and verification. Designed for frequent testing in industrial, emergency service and law enforcement settings.
25+ Years Supporting Construction Safety Across South Africa
Official MSA safety partner with full lifecycle support across SA and SADC.
We are not just suppliers. We are construction safety specialists who understand fall risk, confined space entry and OHS Act Construction Regulations.
We supply compliant equipment, manage calibration, deliver on-site training and provide ongoing maintenance across Southern Africa.
How We Keep Your Construction Site Safe and Compliant
From fall protection planning and confined space specification through to ongoing compliance, here is how we work.
.
Assess, Specify & Select
We review your fall protection plan and confined space entry requirements under the OHS Act Construction Regulations. We specify certified harness systems, lifelines and gas detectors matched to your site anchorage options, task types and rescue obligations.
Supply & Commission On-Site
We supply certified fall protection and gas detection equipment, conduct harness fit checks, set up tripod systems and calibrate all gas detectors before deployment. Every worker starts a confined space entry or work at height with equipment correctly fitted and tested.
Maintain, Inspect & Certify
We schedule annual harness and fall arrest device inspections under SANS 50365, deliver routine bump testing and calibration of gas detectors, and issue service records that support your site compliance file and principal contractor audit requirements.
Trusted Construction Safety Specialists Since 1999
Official MSA Safety Equipment Partner
Authorised South African MSA distributor supplying certified fall protection, gas detection and PPE for construction sites.
25+ Years Supporting Construction Projects
Serving contractors and developers across South Africa and SADC since 1999, across civil, residential and commercial projects
National Footprint Across Southern Africa
Service centres and field representatives in all major South African metros and SADC regions for rapid supply and on-site support.
OHS Act Construction Regulations Aligned
All fall protection and gas detection equipment is certified and aligned with OHS Act Construction Regulations and relevant SANS standards.
Accredited Training and On-Site Support
Harness fitting, fall protection plan support, confined space entry training and equipment inspection by qualified safety specialists.
Ready to Elevate Your Construction Safety?
Every construction site presents unpredictable risks. Falls from height, hazardous atmospheres and exposure to dangerous substances can occur without warning.
With PSA Africa’s professional construction safety solutions, your workforce operates with confidence. Your site remains compliant. Your teams stay protected.
Get started with your free construction safety assessment.
Common Questions About Construction Safety Equipment and Compliance
Selecting the right fall protection and gas detection equipment for construction is critical. Here are the most common questions from safety officers, site managers and principal contractors.
The OHS Act Construction Regulations require a fall protection plan for work at 2 metres or above. The plan must identify fall risks, specify controls and document equipment to be used. This may include a full body harness with energy-absorbing lanyard, a self-retracting personal fall limiter, or a horizontal lifeline. PSA Africa assists safety officers in specifying the correct system for each task type and anchorage condition.
Any excavation, chamber or enclosed structure meeting the confined space definition under the OHS Act requires atmospheric testing before entry. Construction sites accumulate methane from disturbed soil, CO from nearby generators, and H2S near sewer lines. Oxygen depletion also occurs in sealed excavations. A calibrated multigas detector measuring CO, H2S, LEL and oxygen must be used before and during entry
Compliant entry requires a signed permit-to-work, pre-entry atmospheric test with a calibrated gas detector, a trained standby attendant outside the space, a tripod retrieval system for non-entry rescue, and documented emergency procedures. PSA Africa supplies complete confined space entry kits including the ALTAIR detector, tripod retrieval system and retrieval harness, and delivers on-site training for your site teams.
We provide certified servicing and support for genuine MSA Safety equipment supplied through authorised distribution channels. All servicing is conducted in accordance with official MSA standards using approved parts and procedures.
Yes. PSA Africa provides annual inspection and certification of harnesses, lanyards, self-retracting lifelines and horizontal lifeline systems in accordance with SANS 50365. After inspection, each item receives a service record supporting your site safety file and audit requirements. Equipment that fails inspection is tagged out of service with a written replacement recommendation.
Equipment meets SANS 50361 for full body harnesses, SANS 50362 for connectors, SANS 50363 for energy-absorbing lanyards and SANS 50365 for periodic inspection. Horizontal lifeline systems comply with EN 795 Class C. All products are third-party certified. PSA Africa provides certification documentation for inclusion in your site safety file or client compliance submission on request
Yes. PSA Africa delivers on-site training covering harness donning and pre-use inspection, connection to anchor points and lifeline systems, device limits and removal from service, post-fall inspection requirements, and confined space entry including gas detector operation and permit-to-work procedures. Training is tailored to your equipment, fall protection plan and site hazard register.
